Semi Automatic Double Glazing Glass Machine Production Line

1, Loading part

To Avoid the low-e Glass put inverse side and Leave wheel marks or scratch low-e Coating We use coating inspection -metal film conductive (other company use Photoelectric detection, hard to recognize for higher transparent film coating)

(Nylon and Polyurethane + metal column)

2, Washing and Drying part

* Three pairs soft brushes can wash low-e glass and normal glass , the diameter is less than 0.1mm.
* Materials are stainless steel.
* Wind knife is float design , it always keep the right and suitable distance 3mm between the glass surface and wind knife (Same like LISEC structure(Remark: 3mm is the best drying distance)

There is a universal joint device.When the glass thickness was changed, the air knife can move forward and backward to adjust the distance, so that the relative distance between the wind knife and the glass is constant, so as to avoid the damage to the glass film due to the change of the glass thickness.

* The front and back side squeeze-wheel are all actively move and convey. No mater the glass size is big/ small/thick/thin (8mm) , it all guarantee the glass pass through smoothly.(Same like LISEC)
铝型材风刀鸭嘴
3, Detecting part
4, Assembly part

Built-in beam lifting structure (double beams)
Convenient for detect and wipe the glass 便于检查和擦拭玻璃

5 Adjustable Pressing Parts

1, There have stress after welding in the Pressing frame ,So out-of -shape problems is inescapable after using some time(machine can not press DGU properly, evenly and tightly )
that is not good for IGU quality, any glass project can not accept these products

For this uneven inescapable issue, here are our solution :

a.we all do the aging treatment , it’s the stress-remove by vibration failure device.

b.The important is We design the 74 points on the backbord, if there have any out-of shape problems we can adjust easily at any time. ( same like Bystronic structure )

Main components list

Components	Brand	Remark
Servo motor	Germany Simens	For stepped glass
Servo driver	Germany Simens	For stepped glass
Servo motor	Germany Simens	For transfer
Servo motor	Germany Simens	For press
PLC	Germany Simens
Low voltage component	Germany Simens
Frequency converter	Germany Simens
Switching power supply	Taiwan MW
Optoelectronic switch	Korea Autonics
Pneumatic component	Taiwan Airtac
Pneumatic component	Taiwan Airtac
Touch screen	Taiwan Wenview
Travel switch	Taiwan (TEND)
Relay	Japan Omron
Button and indicator light	French Schneider

Technical data

2000*2500 Max.glass size	Normal glass	2000*2500mm
	Glass with argon gas	2000*2500mm
2500*3500 Max glass size	Normal glass	2500*3500mm
	Glass with argon gas	2500*3200mm
Min.glass size		280*450mm
Glass thickness		3-15mm
Insulating glass thickness		50mm(special made for 60mm need special notice)
Glass washing speed		Summer 8-10m/min winter 6-7m/min
Glass conveyor speed:		45m/min
Washing brushes		3 pairs
Water supply:		Water consumption:0.5t/h conductivity：≤50μs/cm6-7
Air supply		Flow: 0.8m/min
Air pressure		≥0.8MPa
Total power		3P380V 50HZ 34KW
Dimension		23500*3500*3700mm

Argon Gas Filling Machine

Sealant Spreading Machine

Spreading Rotating Table

Sucker Lifting Machine

Insulating Glass Materials

Electric Vacuum Glass Lifter

Portable Battery Glass Lifter

Vacuum Lifter Machine

Door And Window Machine

Window Welding Machine

Pvc Window Welding Machine

Double Head Cutting Machine

Concrete Mixer